epoxy powder coating equipment

Workflow of epoxy coating production line: 1.Shot blasting, rust removal 2.Pre-heating 3.Spraying 4.Water cooling

Photos of epoxy coated rebar production line:

Main technics explanation:

1.After shot blasting,rust removal,texturing, non-chloride is allowed on the surface of the rebar. The rust removal grad reach Sa 2.5; Roughness≥70

2. Middle-frequency electric heating;pre-heating temperature ≤250°C

3. Automatic static coating unit allow the epoxy colophony powder to coat on the heating surface of rebar. The powder could be reclaimed through the recycling system.

4. Velocity of the coating line:3.0~12m/min

5. Coating THK after solidity:0.18~0.3mm

6. Specification range allowed :Rebar for building: φ8~32 mm; Length:≤12000 m

7.Roller speed range:0.8~12.0 m/min

8. Rust removal grade:ISO890-J:1988 A-B Sa2.5

Processing workflow of epoxy coated rebar:

The steel bar firstly need blasting job before the middle-frequency heating. Then the high pressure static technology allow the powder adhere to the surface of the rebar. After stable putting and flow ,the coating surface with tenacity ,non- seeping and continuity would be formed.

This line is mainly made up of shot blasting system, pre-heating system, spraying and coating system, water cooling system, loading and unloading device.

Processing range:

Product info:
Item	Epoxy coated rebar/bar/dowel
Size	8-40mm dia, 6-12m long
Steel	Hot rolled, deformed, round
Steel standard	ASTM-A615	BS4449:1997
	CAN/CSA-G30.18	JISG3112
Coating	Fusion bonded epoxy
Coating standard	ASTM-A775/775M	BS7295
Remark	Cut and bend are available

Some photos of our workshop:

Authentication:

Some photos of our customers:

epoxy powder coating equipment